BDFFH - 6994-0002 SOLDER FLUX, ROSIN, FOR COPPER
- MSDS: BDFFH
- Manufacturer: PACE INC
- Product Name: 6994-0002 SOLDER FLUX, ROSIN, FOR COPPER
- National Stock Number: 3439-00-168-6515
Product Identification
Product ID:6994-0002 SOLDER FLUX, ROSIN, FOR COPPER
MSDS Date:01/01/1985
FSC:3439
NIIN:00-168-6515
MSDS Number: BDFFH
Responsible Party
LAUREL, MD 20707-1990
US
Emergency Phone: 301-490-9860
Info Phone: 301-490-9860
Cage: 17794
Contractor
Telephone: 301-490-9860
Cage: 17794
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 63.0%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
ROSIN (TLV FOR ROSIN PYROLYSIS PRODUCTS IS 0.1 MG/CUM(TWA)
Fraction By Weight: 36.0%
TURPENTINE
CAS: 8006-64-2
RTECS: YO8400000
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM; 9192
Hazards
Effects of Overexposure:EYE IRRIT:NARCOSIS.ROSIN IS ALLERGEN-POSSIBLE
RASH, HEADACHE,THROAT IRRITTION.
First Aid
First Aid:EYE CONTACT:FLUSH IMMEDIATELY W/PLENTY OF WATER.MFR
RECOMMENDS DILUTE ETHANOL SOLUTION TO REMOVE ROSIN. SKIN
CONTACT:WASH W/SOAP & WATER.INGESTION:INDUCE VOMITING, & GET PROMPT
MEDICAL ATTENTION.
Fire Fighting
Flash Point:65 F (TOC)
Lower Limits:2.5
Upper Limits:15.0
Extinguishing Media:ALCOHOL FOAM, CARBON DIOXIDE OR DRY CHEMICAL
Fire Fighting Procedures:A FINE WATER MIST MAY SMOTHER FIRE, IF
NECESSARY
Unusual Fire/Explosion Hazard:AUTO-IGNITION TEMPERATURE IS 720 F WITHIN
FLAMMABLE LIMITS. MODERATE EXPLOSION HAZARD.
Accidental Release
Spill Release Procedures:REMOVE SOUCES OF IGNITION.WIPE UP IMMEDIATELY
BY SOAKING INTO ABSORBENT MATERIAL. CLEAN UP WITH ALKALINE
DETERGENT.LARGE AMOUNTS MAY BE RECLAIMED.
Handling
Handling and Storage Precautions:STORE AWAY FROM HIGH HEAT & SOUCES OF
IGNITION.KEEP CONTAINERS CLOSED.GROUND METAL CONTAINERS WHEN
POURING USE NON-SPARKING TOOLS NEAR MATERIAL.
Other Precautions:TLV FOR ROSIN CORE SOLDER PYROLYSIS PRODUCT, AS
FORMALDEHYDE IS 0.1 MG/CUM NO SMOKING IN AREAS OF STORAGE OR USE.
AVOID SPLATTERING HOT FLUX.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED
Ventilation:SUFFICIENT TO KEEP BELOW TLV; EXPLOSION-PROOF EXHAUST FANS
Protective Gloves:PLASTIC;RUBBER
Eye Protection:SPLASH-PROOF GOGGLES
Other Protective Equipment:APRONS, IF SPLASHING COULD OCCUR.
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:170 F
Vapor Pres:40
Vapor Density:1.8
Spec Gravity:0.089
Evaporation Rate & Reference:0.03
Solubility in Water:64%
Appearance and Odor:AMBER COLORED,STICKY LIQUID W/ALCOHOL ODOR
Percent Volatiles by Volume:70.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:SMALL AMTS OF TURPENTINE,
CO,CO*2,FORMALDEHYDE, NO*X
Disposal
Waste Disposal Methods:ACCORDING TO FEDERAL,STATE & LOCAL
REGULATIONS.MFR RECOMMENDS PYROLYSIS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.